How to use the main fire fighting equipment of fire truck
(1) Suction pipe: It is used to connect the water inlet of the pump to draw water from the water source, and it is placed on the top of the cabin.
(2) Water filter: It is installed at the other end of the suction pipe. It can prevent the water inlet pipe from being blocked by debris when absorbing water to the outdoor water source. When the pump stops temporarily, due to the role of the check valve in the water filter, the water in the suction pipe will not leak out, and it will be filled up quickly when the pump is restarted.
(3) Peer connection interface: When using a fire hydrant, it is used to connect the pump and the hydrant. Placed in the equipment room as usual.
(4) Water Divider: It is a connection device that divides the 80mm caliber hose main line into three 65mm caliber branch lines. Each water outlet is controlled by a ball valve. Each outlet can be used simultaneously or separately. Place in the equipment room everyday.
(5) Water collector: When the external water source of the fire truck uses a water interface, the water collector can be installed on the water inlet of the pump first, and the other two 65mm interfaces are used to connect to the water belt. The other end is connected to the water source interface , Often used for large relays between fire trucks or fire hydrants connecting lOOmm outlets. Placed in the equipment room as usual.
(6) Reduced diameter interface: It is used to connect the water outlet valve on the car with the transition between the 80mm and 65mm calibers of the medium pressure water belt and low pressure water belt. Placed in the equipment room as usual.
(7) Hose wrapped with persimmon: In the process of fire extinguishing, when the water hose is partially ruptured and leaked, you can use the water wrapped persimmon to wrap the water leak tightly to prevent the crack from expanding and reduce water loss. Placed in the equipment room equipment box everyday.
(8) Hose hook: It is used to suspend the water hose on the ladder to assist the firefighters who control the hose to control the hose.
(9) Medium pressure water hose: When extinguishing fire at long distances and high floors, and when the water pressure needs to be increased, the medium pressure water hose should be connected to the medium pressure water outlet valve first. Low-medium voltage conversion interface) connected to ordinary low-pressure water hose.
(10) Foam connection hose: When the foam in the foam tank on the car is used up, an external foam type can be used. One end is connected to the external interface of the foam proportioner, and one end is inserted into the container containing the foam.
(11) Foam gun foam straw: When the foam proportion mixed weapon is not used, one end of the foam gun can be inserted into the foam container.
Equipment is mainly divided into fire-fighting, life-saving and emergency types. For specific equipment, see the equipment equipment table. Or call the manufacturer's car hotline: 13872886021 15826721517