Chengli water tank fire truck
Fire trucks have been established for more than 180 years since the establishment of New York in 1835 in the United States in the last century. At that time, there were only 4 people. The fire brigade has been established by the public security organs for public fire safety and the safety of people's lives and property in a municipal area The specialized agencies are important institutions for maintaining local stability and social development.
Then the fire truck has become an indispensable tool for fire fighting and rescue.
There are various types of fire trucks with complex functions, such as water tank fire trucks, foam fire trucks, high-eject fire trucks, emergency rescue fire trucks, and fire sprinklers.
Our company has a number of popular water tank fire trucks. The following provides a parameter for everyone's reference. For more details, you can also call: 13878886021, our senior sales staff will recommend economical models for you, and have professional and technical personnel to answer all your questions about special vehicles.
8 吨水罐消防车 Howo 8 tons water tank fire truck
I. Vehicle structure and technical parameters
1. Manufacturer: China National Heavy Duty Truck Group Jinan Truck Co., Ltd.
2.Second class chassis ZZ5207N4617E5
¡Á 2 3.Drive type: 4 ¡Á 2
4. Wheelbase: 4600mm
5. Engine model: D10.31-50
6. Engine manufacturer: China Heavy Duty Automobile Group Co., Ltd.
马力） 7. Power: 228KW ( 310 horsepower)
8. Total weight at full load: 19850kg
9. Rated load: 7510kg
10. Curb weight : 11890kg
11. Maximum speed: ≥ 95km / h
¡Á 2500 ¡Á 3640mm 12. Dimensions: length ¡Á width ¡Á height 8470 ¡Á 2500 ¡Á 3640mm
Knot 人 Structure: Flat head double row cab, all-steel frame welded structure, seat setting: 6 people
Assume 警报器、回转警灯开关、取力器控制开关及指示灯。 Preparation: In addition to the original vehicle equipment, it is equipped with a 100W alarm, slewing warning light switch, power take-off control switch and indicator light.
type 型常压消防泵 Number: CB10 / 60 Normal Pressure Fire Pump
flow Amount: Normal pressure 60L / s
Press Force: 1.0MPa at normal pressure
（吸深7m时） Diversion time: ≤35s (at a suction depth of 7m )
Installation form: rear mounted
个Φ125mm的后进水，由罐体进入消防泵，装1只Φ125mm蝶阀，连接液罐与水泵 Internal water inlet pipe: 1 Φ125mm rear water inlet, enter the fire pump from the tank, install a Φ125mm butterfly valve, connect the liquid tank and the water pump
，接外吸管，内扣管牙式接口， External water inlet pipe: The diameter of the water inlet of the pump after the pump is Φ125mm .
根) 。 (Seal closed); water is drawn after the pump, and the suction pipe is Φ125 ¡Á 4m (2 ) .
个Φ80mm球阀控制的常压出水口； ※ pump on each side of a ball valve Φ80mm outlet pressure control;
的炮管路，采用Φ80mm挠性接头，用Φ80mm球阀控制。 ※ One Φ80mm gun pipeline adopts Φ80mm flexible joint and is controlled by Φ80mm ball valve.
Water injection pipeline:
注水管路，可通过水泵直接向罐内注水； ※ One Φ50mm water injection pipe can directly inject water into the tank through the pump;
个Φ65mm的外注水口。 ※ There is an external water injection hole of Φ65mm on each side of the vehicle body.
Residual water drain line: In order to protect the water pump and ball valves, install a residual water drain valve at the lowest point of the pipeline.
Cooling water pipeline: In order to make the power take-off cope with various complicated situations, it is equipped with cooling water pipeline.
type 型 Number: PS50
flow （ 1.0MPa ） Amount: 60L / s ( 1.0MPa )
Shoot Process: Water ≥60m
17. Liquid tank (exposed type)
Liquid carrying capacity: water 8000L
material 不锈钢罐体） Quality: High-quality carbon steel (optional 304 stainless steel tank)
Knot Structure: Welded, built-in anti-swing plate.
※ 1 human mouth with quick locking and opening device
※ 1 relief valve device
※ 1 level indicator
※ 1 blowdown port, manual valve control
※ 1 air respirator valve
18.Power take off
type Style: Sandwich
Fuck Vertical: solenoid valve control
Cooling method: forced adjustable water cooling.
Lubrication method: splash oil lubrication.
19.Equipment box and pump room
material Quality: The skeleton and skin are made of high-quality steel.
Knot Structure: The pump room and equipment box are welded with a steel frame. There are aluminum alloy curtain doors on the left and right sides of the equipment box and three sides on the left and right of the pump room.
20. Department of additional electrical appliances
※ The front end of the cab is a long row of warning lights, and three flashing lights at the rear (located at the top of the rear pump room).
火场照明灯1只； ※ The roof is equipped with one 24V fire light;
※ There are two flashing lights on the upper side of each side of the vehicle, and safety sign lights and side return reflectors are installed on the lower side.
(Combined), with front and rear indicator lights, one turn signal on each side, crew room, equipment box,
规定。 Pumping stations are equipped with lights, and in accordance with the provisions of GB4785.
；警报器、警灯、爆闪灯电路为独立式附加电路，控制器件安装在驾驶室内。 ※ The power of the siren is 100W ; the siren, warning light and strobe light circuits are independent additional circuits. The control device is installed in the cab.
※ The additional instruments and switches are centrally arranged on the control panel to facilitate operation. Dashboard: True
Air gauge, water pump pressure gauge; fire pump tachometer; liquid level indicating device; power take-off control
Switch and indicator; pump room and equipment box light switch. (Dashboard installation position is in accordance with technical agreement
2. Manufacturing technology process requirements
※ Using domestic high-quality paint;
※ The roof, fenders, rim outer ring, front bumper are white, and the rest are big red.
2. All operation switches, meters, equipment and vehicles have a nameplate mark that conforms to the specifications;
《消防车消防性能要求及试验方法》的规定； 3. The vehicle performance complies with the requirements of GB7956 "Fire truck performance requirements and test methods";
的规定； 4. The liquid tank meets the requirements of GA39.5-92 ;
5. All riveting intervals are even and moderate;
6. The roof is provided with a protective fence, a non-slip pattern board, and the way of taking the suction pipe and the fire ladder conforms to the requirements of the bid and technical agreement.
7. The vehicle is provided with an escalator.
3. Equipment layout requirements and equipment configuration standards
个动作内取用任何器材。 ※ Stand on the ground or use any equipment within 2 steps on the pedal.
※ The equipment is compactly arranged, firmly clamped, and easy to access.
※ The arrangement of other special equipment meets the requirements of the bid and technical agreement
※ Fix all the equipment in the equipment table with the special fixture for anti-rust, anti-vibration, anti-fall and anti-scratch.
※ The spare tire is installed above the roof.
※ Conventional equipment: see schedule one
Fourth, on-board documents
※ Chassis Instruction Manual
※ Chassis quality warranty card
※ Chassis Maintenance Manual
※ Chassis certificate
※ List of tools
※ Engine number printed
※ Printed chassis number
※ Vehicle Certificate
※ Instruction manual for fire truck
※ On-board fire equipment list
Fire truck instruction manual
Fire truck equipment configuration table
Car Chassis Instruction Manual
Car chassis certificate
Fire Pump Instruction Manual
On-board accessories (tools)
Original chassis accessories and tools
¡Á 4 米 125 ¡Á 4 meters
¡Á 2-1.6 FII80 / 65 ¡Á 2-1.6
¡Á 2-1.0 JII125 / 65 ¡Á 2-1.0
KJ65 / 80
570 Length 570
Ground Hydrant Wrench
；长 400 QT-DS1 ; length 400
Underground fire hydrant wrench
860 Length 860
Suction pipe wrench
DC Water Gun
； 65 QZG3.5 / 7.5 ; 65
DC Flower Water Gun
； 65 QZK3.5 / 7.5 ; 65
Air foam gun (including gun suction pipe)
； 65 QP8 / 0.7Z ; 65
Foam outer pipette assembly
40 ¡Á 2700 Φ 40 ¡Á 2700
㎏ 3 ㎏
1050 Length 1050
Fire waist axe
390 ； GF-285 Length 390 ; GF-285
；长 830 QTF-DG ; length 830
1060 Length 1060
Fire flat axe
；长 810 QTF-PF ; length 810
、凡未列入该配置表中其他总成、部件均为用户要求选配。 1. All other assemblies and components not listed in the configuration table are optional for users' requirements.
、发车时销售员应将提车单与此表一并到采购部制单员处办理器材配置领取手续。 2. At the time of departure, the salesman should send the car pick up list together with this form to the purchaser's order office to handle the equipment configuration and collection procedures.